Wireless laser communication CENTAURI Features
Fast deployment
Since there is no need to secure land use rights or perform excavation work to lay the lines, it can be quickly installed on-site.
Wide bandwidth
It can be replaced by optical fiber or microwave communication, and the line speed can be expanded up to 100 Gbps in the future.
Low-cost implementation
No spectrum licenses or fiber installation costs are required, so it can be recorded as an operational expense rather than an initial investment.Application example
Telecommunications carriers
Enhance and scale your communications services. Support 4G/5G backhaul, fronthaul, and last-mile connectivity to underserved areas.
Internet Service Provider (ISP)
Enable rapid market entry through fast capacity expansion by shortening time from service launch to revenue generation.
Large-scale facilities
Quickly connect entire campus and support mission-critical application with scalable network capacity.
In the event of a disaster
Deploy 10 Gbps short-distance links in hours, with lightweight, low-power designs for mobile environments, and secure, congestion-tolerant communications.
System
| Model |
CENTAURI 10 G
|
CENTAURI 25 G | |
|---|---|---|---|
| Maximum Throughput | 10 Gbps full duplex | 25 Gbps full duplex | |
| interface | data | SFP＋ | SFP28 |
| Management Port | 100 BASE-T | 100 BASE-T | |
|
Standard round trip delay time (3 km length)
|
< 25 μs | ||
| Operating range (rain zone) | distance | 200 m ～ 3 km | |
| availability | +99%～99.999% | ||
| Wavelength | 1550 nm | ||
| Automatic Power Control | Up to 23 dBm / 199 mW | ||
| Automatic pointing and tracking | Unique real-time laser stabilization Range: ±2° horizontal, ±2° vertical | ||
| Management Interface | 100 BASE-T (RJ-45) | ||
|
Network Monitoring and Configuration
|
Outbound / Transcelestial NMS SNMP (v3) | ||
| Deployment Environment | Intended for outdoor use | ||
| Communication Protocol | OSI Layer 1 (PHY) | ||
| Synchronization | Pass-Through Bridge | ||
Compliance standards and safety
| General Safety |
IEC 62368-1:2014+A11:2017
|
|---|---|
| Laser Safety |
Class 3B Laser Product
IEC/EN 60825-1 Equipped with Auto Power Reduction (APR) function, it ensures laser safety standards (compliant with IEC60825-12). |
|
EMI/EMC Interference
|
FCC 15B、EN55011、EN 55032/35/24
|
| Quality Standards |
ISO 9001、ISO 14001
|
Product Specifications
| Size |
32 (L) x 18 (W) x 20(H) cm
|
|---|---|
| Equipment Weight |
2.7 kg
|
|
Mount Weight
|
1.1 kg
|
| Power Rating |
48 V DC / 56V PoE DC 60 W 2.0A
|
| power consumption |
20 W POE 802.3 at (heater OFF) or
32 W POE 802.3 bt (heater ON) or
48 V DC
|
| Pole Mount |
Pole diameter within 3-4 inches
±3° vertical adjustment
|
| operating temperature | -40～50° C |
| Weatherability |
IP65 Standard
|
close up