Solutions for speedy, low-cost mass production of high-quality optical connectors
 |
Precisely polish the end face of the optical connector | |||
|
|
 |
Mass production connector polishing machine
The ATP-3200 is an automatic polishing machine that can polish 1 to 96 optical connectors at the same time. The unique polishing path program shortens the polishing time while reducing the waste of polishing paper. |
||
| Precision polishing of the end face of the optical connector plug with optical fiber bonded is required to ensure stable propagation performance and long-term reliability. | ||||
|
|
||||
| Optical connector grinding machine / grinding machine film | ||||
| ・Handy type optical connector polisher POP-311 ・Mass production type optical connector polishing machine ATP-3200 |
||||
 |
Clean the end face of the optical connector | |||
 |
|
Optical connector cleaner The cleaning cloths and fibers used in NTT-AT 's optical connector cleaners are made from special materials that have been washed in a clean room, making it easy to remove even the tiniest dirt that is invisible to the naked eye. |
||
| To ensure that the power of the optical signal is transmitted, it is necessary to remove impurities such as polishing debris. Therefore, cleaning with a dedicated cleaner is essential. | ||||
|
|
||||
| Optical connector cleaner | ||||
|
・OPTIPOP series |
||||
 |
Check the condition of the end face of the optical connector | |||
 |
|
Optical connector end face inspection device
The optical connector end face inspection device enables detailed inspection of the end face by simply inserting the optical connector into the device. For models with a judgment function, a pass / fail judgment can be easily made with the automatic judgment program. |
||
| After cleaning the optical connector end face, use an end face inspection device to check for dirt or scratches. If there is dirt, re-cleaning is required, and if there are scratches, re-polishing is required. | ||||
|
|
||||
| Optical connector end face end inspection machine series | ||||
 |
Measure the shape of the end face of the optical connector | |||
 |
|
Optical connector end face 3D shape measurement system
This is a non-contact interference type microscope that three-dimensionally measures and evaluates the shape of the end face of an optical connector. |
||
| The end face where the optical connector and the plug come into contact must be hemispherical so that the core centers are in close contact with each other, so the end face shape must be measured accurately. | ||||
|
|
||||
| Optical connector end face 3D shape measurement system | ||||
| ・MAX/WIZ+ series | ||||
 |
Evaluate the amount of reflection attenuation and insertion loss of optical signals | |||
 |
|
Optical connector characteristic evaluation equipment
This is an optical characteristic measurement system that can measure and evaluate various optical devices including optical connectors. By replacing and combining modules, you can configure a variety of measurement systems such as single mode fiber (SMF), multimode fiber (MMF), single core, and multi-core. |
||
| To confirm that the completed optical connector meets the standard performance criteria, the connector is actually irradiated with light to measure the return loss, insertion loss, etc., and evaluated. | ||||
|
|
||||
| Optical connector optical characteristic evaluation equipment | ||||
| ・Optical connector optical characteristics measurement solution | ||||
Optical connection construction products
Introducing tools for laying and maintaining optical fiber cables.
close up