Optical connector end face 3D shape measurement system
MAX / WIZ series
To ensure a stable and correct connection of optical connectors, the contacting end faces must have the appropriate shape, so precise measurement of the end face shape is essential.
The MAX/WIZ series optical connector end face 3D shape measurement system is a non-contact interference microscope that complies with IEC international standards and automatically measures the end face shape of single-fiber and multi-fiber connectors.
In addition to its high measurement accuracy and ease of use, its compact body and speedy measurement enable improved work quality at optical connector manufacturing sites.
* For measurement, a separate PC and a mounting jig according to the connector type are required. Please check the following operating environment for the operating environment of the PC.
Download materials
feature
Compact and lightweight housing
The housing has a compact design that can be installed in a smaller space than a B4 notebook, and weighs less than 4kg *, making it easy to carry.
*MAX-Quantum only weighs 4.8kg
Measurement possible with a general-purpose PC
Just install the measurement software and driver on a standard Windows PC and you can start measuring right away.
Clear images displayed quickly
By adopting a high-performance image sensor that boasts a wide viewing angle and high resolution, high-precision image measurement without missing pixels is realized.
A wide range of mounting fixtures
The mount jig is interchangeable, so it is possible to measure not only standard optical connectors such as SC, LC, and FC, but also special optical connectors such as E2000 and MIL-ST.In addition, the MAX/WIZ series allows connectors to be attached with one touch, making setup even smoother.
No vibration isolation table required
Since the housing has been carefully vibration-isolated, there is no need for an anti-vibration table, and it can be installed anywhere.
No setup required
Due to the use of precision ground mounting jigs, there is almost no need for adjustment work such as troublesome calibration.
AF (autofocus) function
The MAX and WIZ series have a built-in AF function, which eliminates the need to manually focus for each measurement, making work more efficient.
High reproducibility in multi-core measurements
Sumix's unique latest technology SideView (measures the angle of the guide pin from the side) enables even higher accuracy and reproducibility of measurement. In addition, since there is no need to hold down the connector and it is possible to fix the connector only by inserting the butt, it is easy to incorporate into an automated line.
Model selection points
You can choose the model according to the purpose of measuring the connector end face.
Single-core/multi-core dual-use
| Model number | Performance | function | |
|---|---|---|---|
| field of view | resolution | ||
| MAX-Quantum | Big | High |
|
| MAX-QM-H | Big | During ~ |
|
Field of view Large: 3 mm square or more / Medium: Less than 3 mm square 0.8 mm square or more / Small: Less than 0.8 mm square
Resolution High: Less than 2 μm/Medium: 2 μm to less than 3 μm/Low: 3 μm or more
| Model number | MAX-QM-H | MAX-Quantum | ||
|---|---|---|---|---|
| Measurement time for 1 terminal *1 | 1 second (single core) 3 seconds (MT12 core) |
1.4 seconds (single core) 7 seconds (MT12 core) |
||
| shape letter Measurement Fixed |
Repeatability CF/ Repeatability CR (SC/PC) *2 |
curvature radius (%) | 0.04／0.05 | 0.04／0.05 |
| Fiber height (nm) | 0.1／0.4 | 0.1／0.4 | ||
| Eccentricity (μm) | 0.04／1.1 | 0.04／1.0 | ||
| Repeatability CF/ Repeatability CR (MT12) *2 |
curvature radius (%) | 0.9／1.2 | 0.9／1.2 | |
| Fiber height (nm) | 0.8／1.1 | 0.8／1.1 | ||
| Ferrule angle (deg) | 0.005／0.01 | 0.005／0.01 | ||
| ※１： | The measurement time depends on the end face condition of the object to be measured and the performance of the PC. |
| ※２： | Repeatability CF is the numerical value at 1Σ when the reproducibility is measured 30 times without inserting/removing the optical connector. Repeatability CR is a numerical value at 1Σ when the optical connector is inserted and removed for each measurement and the reproducibility is measured 30 times. Only MAX-Quantum uses SC/APC for single fiber data. |
Single core only
| Model number | Performance | function | |
|---|---|---|---|
| field of view | resolution | ||
| MAX-QS-H | During ~ | High |
|
| WIZ-QS-112 | During ~ | During ~ |
|
Field of view Large: 3 mm square or more / Medium: Less than 3 mm square 0.8 mm square or more / Small: Less than 0.8 mm square
Resolution High: Less than 2 μm/Medium: 2 μm to less than 3 μm/Low: 3 μm or more
| Single fiber only | ||||
| Model number | WIZ-QS-112 | MAX-QS-H | ||
| Measurement time for 1 terminal *1 | 1.3 seconds (single core) | 2 seconds (single core) | ||
| shape letter Measurement Fixed |
Repeatability CF/ Repeatability CR (SC/PC) *2 |
curvature radius (%) | 0.2／0.2 | 0.1／0.16 |
| Fiber height (nm) | 0.4／0.5 | 0.1／0.4 | ||
| Eccentricity (μm) | 0.02／1.1 | 0.08／0.8 | ||
| ※1： | The measurement time depends on the end face condition of the object to be measured and the performance of the PC. |
| ※2： | Repeatability CF is the numerical value at 1Σ when the reproducibility is measured 30 times without inserting/removing the optical connector. Repeatability CR is a numerical value at 1Σ when the optical connector is inserted and removed for each measurement and the reproducibility is measured 30 times. |
Measurable ferrule connectors
| Single fiber only | Single-core/multi-core dual use | |||
| MAX series |
WIZ series |
MAX Series | ||
| Model number | WIZ-QS-112 | MAX-QS-H | MAX-QM-H | MAX-Quantum |
| ST, FC, SC (PC and APC) |
○ | ○ | ○ | ○ |
| MU, LC (PC and APC) |
○ | ○ | ○ | ○ |
| E2000 (PC and APC) |
○ | ○ | ○ | ○ |
| MIL-ST (M83522/16, MIL-C-83522) |
○ | ○ | ○ | ○ |
| M29504/14 (MIL-PRF-29504/14) |
○ | ○ | ○ | ○ |
| SMA 905 | ○ | ○ | ○ | ○ |
| MT-RJ (PC and APC) |
☓ | ○ | ○ | ○ |
| MT12-MT72 (PC and APC) |
☓ | ☓ | ○ | ○ |
| MT16, MT32 (PC and APC) |
☓ | ☓ | ○ | ○ |
| MTP/MPO (PC and APC) |
☓ | ☓ | ○ | ○ |
| MTP/MPO (12-72 fiber and 16-32 fiber; PC and APC) SVF mount compatible |
☓ | ☓ | ○ | ○ |
Functions and features of shape measurement software [MaxInspect]
Easy-to-use interface
The interface is iconized for each function, allowing intuitive operation. In addition to the standard Japanese manual, NTT-AT 's own simplified manual is also included, so even first-time users will not get lost in operation.
* Language can be selected from English, Chinese, and Japanese. (The left figure is a Japanese screen)
Designed for mass production
It is equipped with functions ideal for quality inspection in mass production processes, such as simple display settings (express mode) and hands-free measurement using a foot pedal switch.* It is also possible to customize the operating environment according to the user, such as setting an operator-only mode in which pass/fail criteria cannot be changed.
*The foot pedal switch is optional.
Enhanced report output function
Shape measurement results and automatic flaw judgment results can be output and saved in PDF, HTML, and Excel formats. In addition, the maximum, minimum, average, and deviation of each measurement data are automatically calculated and can be output in summary format, so there is no need to newly calculate them.
Automatic scratch detection function
During end-face shape measurement, an image of the optical connector end face is captured, and scratches, dirt, chips, etc., are detected and identified through image analysis, enabling automatic pass/fail determination. End-face scratch inspection and end-face shape measurement, which were previously separate processes, can now be performed simultaneously with a single MAX series unit, contributing to a reduction in the number of processes and shortening of process time.
* WIZ-QS-112/MAX-QM-H are not supported.
Operating environment
| Compatible OS | Windows 11 |
|---|---|
| CPU | Intel Core i7 |
| memory | 4GB or more |
| interface | USB 3.0 |
| Measurement result output | ・Excel 2010 or later ・HTML |
*: The operating environment is subject to change without notice.
specification
| Single fiber only | Single-core/multi-core dual use | |||
| model number | MAX-QS-112 | MAX-QS-H | MAX-QM-H | MAX-Quantum |
| light source | Green LED (530nm) | |||
| external interface | USB3.0×2 or DC jack for power supply x 1 and USB3.0 x 1 |
|||
| weight (kg) | 3.9 | 3.9 | 3.8 | 4.8 |
| External dimensions (H×W×L mm) | 93×120×90 | 109×137×183 | 103×137×183 | 181×213×117 |
Standard accessories
| Product name | quantity |
|---|---|
| Hard case for storing measuring instruments | 1 piece |
| Body calibration mount (flat standard mount) | 1 piece |
| USB memory (measurement software [MAXInspect], license file included) | 1 piece |
| USB cable | One |
| AC adapter | 1 piece |