Long-life polishing film AAS-DM series (for pre-process)
The AAS-DM series diamond polishing film is a next-generation polishing film that combines long lifespan with high yield.
feature
- It is most suitable for pre-process polishing of ADS finishing process of optical connector end faces.
- Unprecedented long life has been achieved.
- Since the variation in diamond grain size is suppressed, the ferrule end face is finished with a stable surface roughness.
- Compatible with low load grinder and high load grinder, you can choose any grinder.
specification
| type | AAS-DM series diamond polishing film |
|---|---|
| Abrasive grain size | AAS-DM01: 1 μm, AAS-DM03: 3 μm, AAS-DM09: 9 μm |
| standard size | Round type (Disk type) : 127mm (5inch) dia. (25pcs/set) |
| Square type (Roll type): 140mm (5.5inch) x 12m (1/set) | |
| base thickness | 75 μm (3 mils) |
| Applicable ferrule | 2.5mm diameter zirconia ferrule |
| 1.25mm diameter zirconia ferrule | |
| Storage conditions | Temperature: 10-30 degrees, Humidity 30-60% |
* Polishing data is an example and may differ depending on polishing conditions, equipment used, shape of ferrule, etc.
Measurement data
Measurement data part 1
This data shows the amount of polishing done relative to the polishing time when using polishing film, and the amount of scratches on the end face of the optical fiber connector.
[Polishing conditions]
Polishing machine: High-load type polishing machine
Inspection machine: FVDW 2409 × 400 (JDSU blue LED)
Sample size: 18 x 2.5mm diameter ferrules
It can be seen that the AAS-DM01 film maintains a stable amount of polishing even when the polishing time is long.
AAS-DM09→DM03→DM01 end face photo after polishing
| AAS-DM01 | Other company 1 | Other company 2 | Other company 3 |
 |
 |
 |
 |
Measurement data part 2
This is data on the amount of polishing versus polishing time and scratches on the end face of an optical fiber connector when using a polishing film. We use a low-load type polishing machine.
[Polishing condition]
Polisher: Low-Load Polisher
Inspection machine: FVDW 2409 × 400 (JDSU blue LED)
Sample quantity: 2.5mm diameter ferrule x 12 pieces
It can be seen that the AAS-DM01 film maintains a stable amount of polishing even when the polishing time is long.
AAS-DM09→DM01 end face photo after polishing
| AAS-DM01 | Other company 1 | Other company 2 | Other company 3 |
 |
 |
 |
 |
*Design and specifications are subject to change without notice.
Download materials
Product Safety Data Sheet (SDS) for Optical Connector Polishing Film and Polishing Fluid